1. Colorado small cities
2. Colorado smaller cities
3. Colorado
4. Denver County, CO Restaurants

Business Info

Restaurant: PALETERIA CHIHUAHUA #2
Address: 1201 Bruce Randolph Ave, Denver, CO
Total inspections: 16
Last inspection: Sep 22, 2011

Score
(the higher the better)
100

Add photo of this business × Description:

Restaurant representatives - add corrected or new information about PALETERIA CHIHUAHUA #2, 1201 Bruce Randolph Ave, Denver, CO »

First Name:

Last Name:

Your position at this restaurant:

E-mail (will not be displayed publicly)   

Phone: (will not be displayed publicly)

Corrected or new information:  (50-4000 characters, will be displayed publicly)

Type the code shown:

Your IP address 3.15.188.27 will be logged.

Violation descriptions and comments

HAND WASHING & TOILET FACILITIES
6c Soap and drying devices unavailable
PUBLIC HEALTH SIGNIFICANCE
Handwashing sinks must be kept clean and well stocked with hand soap and hand towels to encourage frequent use. Hot and cold water must be provided through a mixing valve so employees can properly wash their hands.
FOOD LABELING AND PROTECTION
9a Not in original container; improperly labeled
PUBLIC HEALTH SIGNIFICANCE
The identity of a food's origin and composition is important when tracing its' source if implicated in a foodborne illness or if under recall. Ingredient information is needed by consumers who have allergies to certain foods or food ingredients. Bulk ingredients such as flour, sugar and salt that have been removed from their original containers must be labeled so they are not mistaken for similar looking ingredients and chemicals.
UTENSILS - SINGLE SERVICE ARTICLES
13a Utensils not provided; used/stored improperly
PUBLIC HEALTH SIGNIFICANCE
To help prevent contamination of food by workers, utensils must be provided and used to dispense food. Utensils must also be provided for use in all customer self service areas such as salad bars, buffets and for bulk food dispensing.
Utensils that are provided to dispense and serve foods must be stored and handled in a manner that protects the utensil and the food from contamination. Contaminated utensils will contaminate the foods that are being dispensed and served. To prevent possible contamination of food by utensils during pauses in preparation and dispensing , utensils must be stored:
a) in the food with the handle up out of the food,
b) in a running water dipper well,
c) in ice
water or in hot water that is above 140oF,
d) on a clean dry surface if the utensil is cleaned and sanitized once every four hours.

FOOD SOURCE
1a Unapproved source
PUBLIC HEALTH SIGNIFICANCE
All foods used in retail food establishments must be obtained from commercial suppliers that are inspected by health authorities (state or local health departments, USDA, FDA). Foods prepared in private homes are frequently implicated in foodborne outbreaks. Non-commercial kitchens have limited capacity for maintaining food at proper temperatures and due to their small size are conducive to situations that can result in cross contamination. Controlled processing is required for the safe preparation of food for sale to the public.
FOOD TEMPERATURE CONTROL
3f Food thermometer not available
PUBLIC HEALTH SIGNIFICANCE
Most food poisonings are associated with foods held at temperatures between 41oF and 140oF for extended periods of time. Health Department inspections stress temperature control of potentially hazardous food.
Because food temperature control is so critical in assuring food safety all foods establishment must have and must use an accurate thermometer to check food temperatures. Food product thermometers are to be scaled 0—220oF. They must be accurate to +/-2oF. Food workers need to verify that foods are being properly cooled, that they are reheated to 165oF, that they are cooked to the required temperatures, that they are held hot above 140oF, etc. by using a thermometer.
HAND WASHING & TOILET FACILITIES
6c Soap and drying devices unavailable
PUBLIC HEALTH SIGNIFICANCE
Handwashing sinks must be kept clean and well stocked with hand soap and hand towels to encourage frequent use. Hot and cold water must be provided through a mixing valve so employees can properly wash their hands.
FOOD LABELING AND PROTECTION
9a Not in original container; improperly labeled
PUBLIC HEALTH SIGNIFICANCE
The identity of a food's origin and composition is important when tracing its' source if implicated in a foodborne illness or if under recall. Ingredient information is needed by consumers who have allergies to certain foods or food ingredients. Bulk ingredients such as flour, sugar and salt that have been removed from their original containers must be labeled so they are not mistaken for similar looking ingredients and chemicals.
TESTING DEVICES
11c Chemical test kits not provided; inaccessible
PUBLIC HEALTH SIGNIFICANCE
The temperature of the wash and rinse water is a critical factor effecting cleaning and sanitizing of equipment and utensils. It is important that warewashing machines and high-temperature three-compartment warewashing sinks are therefore equipped with accurate thermometers to measure water temperatures. Sanitzer test kits must also be provided and used by food workers to ensure that the concentration of any chemical sanitizers being used are correct. Warewashing machines are required to operate at specific water flow pressures. Water flow pressure can greatly effect how well a dishmachine will sanitize. Low water flow pressure results in inadequate spray patterns and incomplete coverage of the equipment and utensils being washed. Excessive flow pressures will atomize water droplets and again result in incomplete coverage. A pressure gauge installed on the dishmachine’s final rinse line allows workers to monitor the water flow pressure of a dishmachine.
UTENSILS - SINGLE SERVICE ARTICLES
13c Reuse of single service articles
PUBLIC HEALTH SIGNIFICANCE
Single service items such as paper cups, napkins, straws, plastic “to-go” food containers and plastic tableware are to be used once and then discarded. These items are not constructed to be durable enough to withstand repeated use and repeated washing and sanitizing.
PHYSICAL FACILITIES
14d Lighting inadequate
PUBLIC HEALTH SIGNIFICANCE
Light levels are specified so that sufficient light is available to enable workers to read labels, identify toxic materials, recognize the condition of food, utensils and other supplies, work safely and to evaluate cleaning. Sufficient light makes the need for cleaning apparent by making any accumulation of food spills and other soil conspicuous. Lights that are shielded, coated or shatter resistant help prevent breakage and contamination of food, clean equipment, utensils and single service items from fragments of glass should a bulb break.

FOOD SOURCE
1a Unapproved source
PUBLIC HEALTH SIGNIFICANCE
All foods used in retail food establishments must be obtained from commercial suppliers that are inspected by health authorities (state or local health departments, USDA, FDA). Foods prepared in private homes are frequently implicated in foodborne outbreaks. Non-commercial kitchens have limited capacity for maintaining food at proper temperatures and due to their small size are conducive to situations that can result in cross contamination. Controlled processing is required for the safe preparation of food for sale to the public.

FOOD SOURCE
1b Unwholesome; signs of spoilage
PUBLIC HEALTH SIGNIFICANCE
Canned or hermetically sealed foods must be handled so as to maintain container and product integrity. Dented and damaged containers allow for the contamination of the food within the container. This contamination can result in the growth of disease-causing bacteria or spoilage of the can’s contents. Food establishments are required to inspect can goods for damage. Damaged goods are not to be used. They must be disposed of or be segregated and held in designated areas pending proper disposition.
FOOD TEMPERATURE CONTROL
3e Hold cold at 41 �°F or less
PUBLIC HEALTH SIGNIFICANCE
Most food poisonings are associated with foods held at temperatures between 41oF and 140oF for extended periods of time. Health Department inspections stress temperature control of potentially hazardous food.
The rate of bacterial growth and possible toxin production by some bacteria, can be greatly reduced when foods are held at temperatures of less than 41oF. This cold holding temperature does not generally kill the bacteria that may be present in food, but will slow or inhibit their growth.
Bacterial growth and possible toxin production by some bacteria, will occur in potentially hazardous foods that remain at temperatures between 41oF and 140oF for extended periods of time. If a food is held “off” temperature (between 41oF and 140oF) for only a short time, no significant bacterial growth or toxin production should occur. When time is used to control bacterial growth, potentially hazardous foods can be held off temperature for only four hours or less. After this time any food product that has not been served must be discarded. Operations that use time as a control must develop a plan that outlines food handling procedures, identifies when a food item is removed from temperature control and when it is to be disposed of. This plan must be approved by the health department.
SANITATION RINSE
4c In place
PUBLIC HEALTH SIGNIFICANCE
All equipment, utensils and food contact surfaces must be properly washed and then sanitized to minimize food contamination. Washing is the removal of food residue or soil from surfaces. Sanitization is the application of heat or chemicals on cleaned surfaces that results in a 99.999% reduction of disease-causing microorganisms. There are many different types of sanitizers that can be used in food establishments. The most common include: hot water between 165oF and 180oF, chlorine mixed at a concentration of 50 ppm, quaternary ammonia mixed at a concentration of 200 ppm, and iodine mixed at a concentration of 12.5 ppm.
Establishments will often have equipment that needs to be washed and sanitized, but is too large to fit into warewashing sinks or dishmachines, or is not designed to be submerged in water. This equipment must be washed and sanitized “in place”. Surfaces must be washed with a detergent solution to remove food residue, then rinsed free of detergents with clean water and then sanitized with an approved sanitizer.
FOOD LABELING AND PROTECTION
9a Not in original container; improperly labeled
PUBLIC HEALTH SIGNIFICANCE
The identity of a food's origin and composition is important when tracing its' source if implicated in a foodborne illness or if under recall. Ingredient information is needed by consumers who have allergies to certain foods or food ingredients. Bulk ingredients such as flour, sugar and salt that have been removed from their original containers must be labeled so they are not mistaken for similar looking ingredients and chemicals.
FOOD LABELING AND PROTECTION
9b Food unprotected from contamination
PUBLIC HEALTH SIGNIFICANCE
Freezing prevents microbial growth in foods, but usually does not destroy all microorganisms. Improper thawing provides an opportunity for surviving bacteria to grow to harmful numbers. If the food is then refrozen, significant numbers of bacteria may be preserved in the food.
Disease-causing organisms can contaminate and/or grow in food that is not stored properly. Drips from condensation and drafts of unfiltered air can be sources of microbial contamination for stored foods. Shoes carry contamination onto the floors of food preparation and storage areas. Raw meats and poultry can contaminate cooked and ready to eat foods if stored above these ready to eat items. Even trace amounts of refuse or wastes present in toilet rooms, rooms used for dressing, storing garbage or tools, or rooms housing machinery can become sources of food contamination.
TESTING DEVICES
11c Chemical test kits not provided; inaccessible
PUBLIC HEALTH SIGNIFICANCE
The temperature of the wash and rinse water is a critical factor effecting cleaning and sanitizing of equipment and utensils. It is important that warewashing machines and high-temperature three-compartment warewashing sinks are therefore equipped with accurate thermometers to measure water temperatures. Sanitzer test kits must also be provided and used by food workers to ensure that the concentration of any chemical sanitizers being used are correct. Warewashing machines are required to operate at specific water flow pressures. Water flow pressure can greatly effect how well a dishmachine will sanitize. Low water flow pressure results in inadequate spray patterns and incomplete coverage of the equipment and utensils being washed. Excessive flow pressures will atomize water droplets and again result in incomplete coverage. A pressure gauge installed on the dishmachine’s final rinse line allows workers to monitor the water flow pressure of a dishmachine.
IMPROPER CLEANING OF EQUIPMENT AND UTENSILS
12d Wiping cloths
PUBLIC HEALTH SIGNIFICANCE
Counter tops, work tables, cutting boards, and other food contact surfaces are required to be wiped down constantly to keep them free of food spill. If spills are left to accumulate, disease-causing microorganisms can survive on contaminated surfaces. Foods, equipment and utensils that come into contact with these dirty surfaces will also become contaminated. To prevent this contamination, wiping cloths must be saturated with a sanitizing solution of adequate strength to kill microorganisms that may be on these surfaces.
UTENSILS - SINGLE SERVICE ARTICLES
13a Utensils not provided; used/stored improperly
PUBLIC HEALTH SIGNIFICANCE
To help prevent contamination of food by workers, utensils must be provided and used to dispense food. Utensils must also be provided for use in all customer self service areas such as salad bars, buffets and for bulk food dispensing.
Utensils that are provided to dispense and serve foods must be stored and handled in a manner that protects the utensil and the food from contamination. Contaminated utensils will contaminate the foods that are being dispensed and served. To prevent possible contamination of food by utensils during pauses in preparation and dispensing , utensils must be stored:
a) in the food with the handle up out of the food,
b) in a running water dipper well,
c) in ice
water or in hot water that is above 140oF,
d) on a clean dry surface if the utensil is cleaned and sanitized once every four hours.
UTENSILS - SINGLE SERVICE ARTICLES
13c Reuse of single service articles
PUBLIC HEALTH SIGNIFICANCE
Single service items such as paper cups, napkins, straws, plastic “to-go” food containers and plastic tableware are to be used once and then discarded. These items are not constructed to be durable enough to withstand repeated use and repeated washing and sanitizing.
PHYSICAL FACILITIES
14c Floors; walls; ceilings in disrepair
PUBLIC HEALTH SIGNIFICANCE
Floors must be kept clean, free of any build up of food spills, dirt and refuse. The accumulation of soil on floors increases the potential for contamination of food, equipment and utensils. It also provides food and harborage for rodents and insects, such as flies and cockroaches. To facilitate easy cleaning, floors must be maintained and constructed to be smooth, durable, non-absorbent and easily cleanable. Floor-wall junctures must be tightly coved with concave cove base to prevent moisture and food residue from collecting in corners and along walls. Utility penetrations must be sealed to eliminate insect and rodent harborage and to prevent moisture penetrating into or through the floor.
Walls and ceilings must be kept clean and free of any build up of food spills, splash or dirt. The accumulation of soil on walls and ceilings increases the potential for contamination of food, equipment and utensils. It also provides a food source for rodents, insects, such as flies and cockroaches. To facilitate easy cleaning, walls and ceilings must be maintained and constructed to be smooth, durable, non-absorbent and easily cleanable. Utilities such as water pipes, sewer lines and electrical conduit are to be enclosed within or behind finished walls and ceilings. Utility penetrations must be sealed to eliminate insect and rodent harborage and to prevent moisture from penetrating into walls and ceilings. Exposed utility lines make cleaning difficult.

HAND WASHING & TOILET FACILITIES
6c Soap and drying devices unavailable
PUBLIC HEALTH SIGNIFICANCE
Handwashing sinks must be kept clean and well stocked with hand soap and hand towels to encourage frequent use. Hot and cold water must be provided through a mixing valve so employees can properly wash their hands.
TOXIC ITEMS
8c Improperly used
PUBLIC HEALTH SIGNIFICANCE
Failure to use cleaners, sanitizers, and other chemicals properly can be very dangerous. Directions listed on container labels must be followed correctly. Failure to follow stated instructions could result in injury to workers or customers. Sanitizers must be used at the proper concentrations: Chlorine 50 ppm, Quaternary Ammonia 200 ppm, and Iodine 12.5 ppm. High levels of sanitizers or soaps can leave harmful residues.
FOOD LABELING AND PROTECTION
9b Food unprotected from contamination
PUBLIC HEALTH SIGNIFICANCE
Freezing prevents microbial growth in foods, but usually does not destroy all microorganisms. Improper thawing provides an opportunity for surviving bacteria to grow to harmful numbers. If the food is then refrozen, significant numbers of bacteria may be preserved in the food.
Disease-causing organisms can contaminate and/or grow in food that is not stored properly. Drips from condensation and drafts of unfiltered air can be sources of microbial contamination for stored foods. Shoes carry contamination onto the floors of food preparation and storage areas. Raw meats and poultry can contaminate cooked and ready to eat foods if stored above these ready to eat items. Even trace amounts of refuse or wastes present in toilet rooms, rooms used for dressing, storing garbage or tools, or rooms housing machinery can become sources of food contamination.
TESTING DEVICES
11c Chemical test kits not provided; inaccessible
PUBLIC HEALTH SIGNIFICANCE
The temperature of the wash and rinse water is a critical factor effecting cleaning and sanitizing of equipment and utensils. It is important that warewashing machines and high-temperature three-compartment warewashing sinks are therefore equipped with accurate thermometers to measure water temperatures. Sanitzer test kits must also be provided and used by food workers to ensure that the concentration of any chemical sanitizers being used are correct. Warewashing machines are required to operate at specific water flow pressures. Water flow pressure can greatly effect how well a dishmachine will sanitize. Low water flow pressure results in inadequate spray patterns and incomplete coverage of the equipment and utensils being washed. Excessive flow pressures will atomize water droplets and again result in incomplete coverage. A pressure gauge installed on the dishmachine’s final rinse line allows workers to monitor the water flow pressure of a dishmachine.

PERSONNEL
2f Training needed
PUBLIC HEALTH SIGNIFICANCE
Food workers must have a basic understanding of food safety as it relates to the job or task they are doing. Dishwashers must know how the dishmachine they operate sanitizes and when they should be washing their hands. Cooks that reheat foods must know the temperature requirements for reheating. Employees who are required to cool foods must know what the temperature requirements are for cooling. The more knowledgeable the food handler is, the safer the food handling practices in the establishment should be.
FOOD TEMPERATURE CONTROL
3f Food thermometer not available
PUBLIC HEALTH SIGNIFICANCE
Most food poisonings are associated with foods held at temperatures between 41oF and 140oF for extended periods of time. Health Department inspections stress temperature control of potentially hazardous food.
Because food temperature control is so critical in assuring food safety all foods establishment must have and must use an accurate thermometer to check food temperatures. Food product thermometers are to be scaled 0—220oF. They must be accurate to +/-2oF. Food workers need to verify that foods are being properly cooled, that they are reheated to 165oF, that they are cooked to the required temperatures, that they are held hot above 140oF, etc. by using a thermometer.
SANITATION RINSE
4c In place
PUBLIC HEALTH SIGNIFICANCE
All equipment, utensils and food contact surfaces must be properly washed and then sanitized to minimize food contamination. Washing is the removal of food residue or soil from surfaces. Sanitization is the application of heat or chemicals on cleaned surfaces that results in a 99.999% reduction of disease-causing microorganisms. There are many different types of sanitizers that can be used in food establishments. The most common include: hot water between 165oF and 180oF, chlorine mixed at a concentration of 50 ppm, quaternary ammonia mixed at a concentration of 200 ppm, and iodine mixed at a concentration of 12.5 ppm.
Establishments will often have equipment that needs to be washed and sanitized, but is too large to fit into warewashing sinks or dishmachines, or is not designed to be submerged in water. This equipment must be washed and sanitized “in place”. Surfaces must be washed with a detergent solution to remove food residue, then rinsed free of detergents with clean water and then sanitized with an approved sanitizer.
HAND WASHING & TOILET FACILITIES
6c Soap and drying devices unavailable
PUBLIC HEALTH SIGNIFICANCE
Handwashing sinks must be kept clean and well stocked with hand soap and hand towels to encourage frequent use. Hot and cold water must be provided through a mixing valve so employees can properly wash their hands.

TOXIC ITEMS
8c Improperly used
PUBLIC HEALTH SIGNIFICANCE
Failure to use cleaners, sanitizers, and other chemicals properly can be very dangerous. Directions listed on container labels must be followed correctly. Failure to follow stated instructions could result in injury to workers or customers. Sanitizers must be used at the proper concentrations: Chlorine 50 ppm, Quaternary Ammonia 200 ppm, and Iodine 12.5 ppm. High levels of sanitizers or soaps can leave harmful residues.

FOOD SOURCE
1f Commissary records
PUBLIC HEALTH SIGNIFICANCE
All retail food preparation must be conducted in a licensed and inspected commissary kitchen. If a retail food licensee prepares and/or stores food in a commissary, the commissary operator is required to maintain records for at least 90 days of the food licensee’s use of the kitchen.
FOOD TEMPERATURE CONTROL
3e Hold cold at 41 �°F or less
PUBLIC HEALTH SIGNIFICANCE
Most food poisonings are associated with foods held at temperatures between 41oF and 140oF for extended periods of time. Health Department inspections stress temperature control of potentially hazardous food.
The rate of bacterial growth and possible toxin production by some bacteria, can be greatly reduced when foods are held at temperatures of less than 41oF. This cold holding temperature does not generally kill the bacteria that may be present in food, but will slow or inhibit their growth.
Bacterial growth and possible toxin production by some bacteria, will occur in potentially hazardous foods that remain at temperatures between 41oF and 140oF for extended periods of time. If a food is held “off” temperature (between 41oF and 140oF) for only a short time, no significant bacterial growth or toxin production should occur. When time is used to control bacterial growth, potentially hazardous foods can be held off temperature for only four hours or less. After this time any food product that has not been served must be discarded. Operations that use time as a control must develop a plan that outlines food handling procedures, identifies when a food item is removed from temperature control and when it is to be disposed of. This plan must be approved by the health department.
SANITATION RINSE
4c In place
PUBLIC HEALTH SIGNIFICANCE
All equipment, utensils and food contact surfaces must be properly washed and then sanitized to minimize food contamination. Washing is the removal of food residue or soil from surfaces. Sanitization is the application of heat or chemicals on cleaned surfaces that results in a 99.999% reduction of disease-causing microorganisms. There are many different types of sanitizers that can be used in food establishments. The most common include: hot water between 165oF and 180oF, chlorine mixed at a concentration of 50 ppm, quaternary ammonia mixed at a concentration of 200 ppm, and iodine mixed at a concentration of 12.5 ppm.
Establishments will often have equipment that needs to be washed and sanitized, but is too large to fit into warewashing sinks or dishmachines, or is not designed to be submerged in water. This equipment must be washed and sanitized “in place”. Surfaces must be washed with a detergent solution to remove food residue, then rinsed free of detergents with clean water and then sanitized with an approved sanitizer.
HAND WASHING & TOILET FACILITIES
6c Soap and drying devices unavailable
PUBLIC HEALTH SIGNIFICANCE
Handwashing sinks must be kept clean and well stocked with hand soap and hand towels to encourage frequent use. Hot and cold water must be provided through a mixing valve so employees can properly wash their hands.
IMPROPER CLEANING OF EQUIPMENT AND UTENSILS
12b Non-food contact surfaces
PUBLIC HEALTH SIGNIFICANCE
The surfaces of cabinets, utensil drawers, shelves, the outsides surfaces of refrigerators, hot holding equipment and other nonfood contact surfaces must be cleaned to keep them free of accumulation of food spills, dirt and grease. The presence of food debris or dirt on nonfood contact surfaces may provide a suitable environment for the growth of bacteria. Workers may inadvertently transfer this contamination to food. Accumulation of food spills and food residue on nonfood contact surfaces may also be a source of food and harborage of insects, rodents, and other pest.
UTENSILS - SINGLE SERVICE ARTICLES
13a Utensils not provided; used/stored improperly
PUBLIC HEALTH SIGNIFICANCE
To help prevent contamination of food by workers, utensils must be provided and used to dispense food. Utensils must also be provided for use in all customer self service areas such as salad bars, buffets and for bulk food dispensing.
Utensils that are provided to dispense and serve foods must be stored and handled in a manner that protects the utensil and the food from contamination. Contaminated utensils will contaminate the foods that are being dispensed and served. To prevent possible contamination of food by utensils during pauses in preparation and dispensing , utensils must be stored:
a) in the food with the handle up out of the food,
b) in a running water dipper well,
c) in ice
water or in hot water that is above 140oF,
d) on a clean dry surface if the utensil is cleaned and sanitized once every four hours.
PHYSICAL FACILITIES
14a Plumbing not installed/maintained
PUBLIC HEALTH SIGNIFICANCE
It is critical that all plumbing fixtures, water and sewer lines in food establishments be maintained in proper working order. Poorly maintained plumbing systems may result in potential heath hazard such as cross connections, the back up of sewage, or leakage. These conditions may directly result in the contamination of food, equipment, utensils or paper goods. They can also adversely affect the ability of food handlers to adequately wash their hands, an establishment’s warewashing operations and increase the potential for cross contamination of food and equipment and utensil.
Toilet rooms and facilities must be of sanitary design and kept clean and in good repair to help prevent contamination of food preparation areas, to motivate employees to maintain a high degree of personal hygiene and to use good sanitary practices. Doors to toilet rooms must be kept closed to help prevent the possible spread of disease-causing microorganisms by flies.
PHYSICAL FACILITIES
14c Floors; walls; ceilings in disrepair
PUBLIC HEALTH SIGNIFICANCE
Floors must be kept clean, free of any build up of food spills, dirt and refuse. The accumulation of soil on floors increases the potential for contamination of food, equipment and utensils. It also provides food and harborage for rodents and insects, such as flies and cockroaches. To facilitate easy cleaning, floors must be maintained and constructed to be smooth, durable, non-absorbent and easily cleanable. Floor-wall junctures must be tightly coved with concave cove base to prevent moisture and food residue from collecting in corners and along walls. Utility penetrations must be sealed to eliminate insect and rodent harborage and to prevent moisture penetrating into or through the floor.
Walls and ceilings must be kept clean and free of any build up of food spills, splash or dirt. The accumulation of soil on walls and ceilings increases the potential for contamination of food, equipment and utensils. It also provides a food source for rodents, insects, such as flies and cockroaches. To facilitate easy cleaning, walls and ceilings must be maintained and constructed to be smooth, durable, non-absorbent and easily cleanable. Utilities such as water pipes, sewer lines and electrical conduit are to be enclosed within or behind finished walls and ceilings. Utility penetrations must be sealed to eliminate insect and rodent harborage and to prevent moisture from penetrating into walls and ceilings. Exposed utility lines make cleaning difficult.

FOOD SOURCE
1a Unapproved source
PUBLIC HEALTH SIGNIFICANCE
All foods used in retail food establishments must be obtained from commercial suppliers that are inspected by health authorities (state or local health departments, USDA, FDA). Foods prepared in private homes are frequently implicated in foodborne outbreaks. Non-commercial kitchens have limited capacity for maintaining food at proper temperatures and due to their small size are conducive to situations that can result in cross contamination. Controlled processing is required for the safe preparation of food for sale to the public.
SANITATION RINSE
4c In place
PUBLIC HEALTH SIGNIFICANCE
All equipment, utensils and food contact surfaces must be properly washed and then sanitized to minimize food contamination. Washing is the removal of food residue or soil from surfaces. Sanitization is the application of heat or chemicals on cleaned surfaces that results in a 99.999% reduction of disease-causing microorganisms. There are many different types of sanitizers that can be used in food establishments. The most common include: hot water between 165oF and 180oF, chlorine mixed at a concentration of 50 ppm, quaternary ammonia mixed at a concentration of 200 ppm, and iodine mixed at a concentration of 12.5 ppm.
Establishments will often have equipment that needs to be washed and sanitized, but is too large to fit into warewashing sinks or dishmachines, or is not designed to be submerged in water. This equipment must be washed and sanitized “in place”. Surfaces must be washed with a detergent solution to remove food residue, then rinsed free of detergents with clean water and then sanitized with an approved sanitizer.
HAND WASHING & TOILET FACILITIES
6b Inaccessible
PUBLIC HEALTH SIGNIFICANCE
Food workers may be unlikely to wash their hands unless properly equipped handwashing sinks are accessible in the immediate work area. Handwashing sinks which are improperly located may be blocked by portable equipment or stacked full of soiled utensils and other items, rendering the sink unavailable for use. Nothing must block the approach to a handwashing sink thereby discouraging its use.
FOOD LABELING AND PROTECTION
9a Not in original container; improperly labeled
PUBLIC HEALTH SIGNIFICANCE
The identity of a food's origin and composition is important when tracing its' source if implicated in a foodborne illness or if under recall. Ingredient information is needed by consumers who have allergies to certain foods or food ingredients. Bulk ingredients such as flour, sugar and salt that have been removed from their original containers must be labeled so they are not mistaken for similar looking ingredients and chemicals.
FOOD LABELING AND PROTECTION
9b Food unprotected from contamination
PUBLIC HEALTH SIGNIFICANCE
Freezing prevents microbial growth in foods, but usually does not destroy all microorganisms. Improper thawing provides an opportunity for surviving bacteria to grow to harmful numbers. If the food is then refrozen, significant numbers of bacteria may be preserved in the food.
Disease-causing organisms can contaminate and/or grow in food that is not stored properly. Drips from condensation and drafts of unfiltered air can be sources of microbial contamination for stored foods. Shoes carry contamination onto the floors of food preparation and storage areas. Raw meats and poultry can contaminate cooked and ready to eat foods if stored above these ready to eat items. Even trace amounts of refuse or wastes present in toilet rooms, rooms used for dressing, storing garbage or tools, or rooms housing machinery can become sources of food contamination.
IMPROPER EQUIPMENT DESIGN AND CONSTRUCTION
10b Non-food contact surfaces
PUBLIC HEALTH SIGNIFICANCE
Non-food contact surfaces of equipment routinely exposed to splash or food debris must be constructed to be smooth, durable, nonabsorbent and easily cleanable. Equipment that does not meet these criteria becomes difficult to clean, allowing soil, moisture, debris and disease-causing bacteria to accumulate.
UTENSILS - SINGLE SERVICE ARTICLES
13b Single service articles improperly stored, dispensed, used
PUBLIC HEALTH SIGNIFICANCE
Single service items such as paper cups, napkins, straws, plastic “to-go” food containers and plastic tableware must be stored and dispensed in a manner that protects these items from contamination. Single service items must be stored up off the floor. Dispensers can be used to protect these items when in service. Single service items such as tableware may be prewrapped, or provided in a dispenser that presents the utensil handle to the server or consumer.
PHYSICAL FACILITIES
14a Plumbing not installed/maintained
PUBLIC HEALTH SIGNIFICANCE
It is critical that all plumbing fixtures, water and sewer lines in food establishments be maintained in proper working order. Poorly maintained plumbing systems may result in potential heath hazard such as cross connections, the back up of sewage, or leakage. These conditions may directly result in the contamination of food, equipment, utensils or paper goods. They can also adversely affect the ability of food handlers to adequately wash their hands, an establishment’s warewashing operations and increase the potential for cross contamination of food and equipment and utensil.
Toilet rooms and facilities must be of sanitary design and kept clean and in good repair to help prevent contamination of food preparation areas, to motivate employees to maintain a high degree of personal hygiene and to use good sanitary practices. Doors to toilet rooms must be kept closed to help prevent the possible spread of disease-causing microorganisms by flies.

PERSONNEL
2c Hands not washed as needed
PUBLIC HEALTH SIGNIFICANCE
The hands are particularly important in transmitting foodborne disease-causing organisms. Food employees with dirty hands and/or fingernails may contaminate the food being prepared. Therefore, any activity which may contaminate the hands must be followed by thorough handwashing. Even seemingly healthy employees may serve as reservoirs for disease-causing microorganisms that are transmissible through food. Staphylococci bacteria, for example, can be found on the skin and in the mouth, throat, and nose of many healthy employees. The hands of employees can be contaminated by touching their nose, mouth, hair or other body parts.
PERSONNEL
2d Poor hygienic practices
PUBLIC HEALTH SIGNIFICANCE
Retail food establishments must have a Health Department approved Hazard Analysis Critical Control Point (HACCP) plan in place when vacuum packageing or when conducting other forms of modified oxygen packaging (MAP). Foods not properly processed using MAP techniques are prone to the growth of botulism. All MAP processed foods must be held refrigerated at 41oF or less until cooking or service. Shelf life of MAP foods are not to exceed 10 days.
FOOD TEMPERATURE CONTROL
3f Food thermometer not available
PUBLIC HEALTH SIGNIFICANCE
Most food poisonings are associated with foods held at temperatures between 41oF and 140oF for extended periods of time. Health Department inspections stress temperature control of potentially hazardous food.
Because food temperature control is so critical in assuring food safety all foods establishment must have and must use an accurate thermometer to check food temperatures. Food product thermometers are to be scaled 0—220oF. They must be accurate to +/-2oF. Food workers need to verify that foods are being properly cooled, that they are reheated to 165oF, that they are cooked to the required temperatures, that they are held hot above 140oF, etc. by using a thermometer.
SANITATION RINSE
4c In place
PUBLIC HEALTH SIGNIFICANCE
All equipment, utensils and food contact surfaces must be properly washed and then sanitized to minimize food contamination. Washing is the removal of food residue or soil from surfaces. Sanitization is the application of heat or chemicals on cleaned surfaces that results in a 99.999% reduction of disease-causing microorganisms. There are many different types of sanitizers that can be used in food establishments. The most common include: hot water between 165oF and 180oF, chlorine mixed at a concentration of 50 ppm, quaternary ammonia mixed at a concentration of 200 ppm, and iodine mixed at a concentration of 12.5 ppm.
Establishments will often have equipment that needs to be washed and sanitized, but is too large to fit into warewashing sinks or dishmachines, or is not designed to be submerged in water. This equipment must be washed and sanitized “in place”. Surfaces must be washed with a detergent solution to remove food residue, then rinsed free of detergents with clean water and then sanitized with an approved sanitizer.
HAND WASHING & TOILET FACILITIES
6c Soap and drying devices unavailable
PUBLIC HEALTH SIGNIFICANCE
Handwashing sinks must be kept clean and well stocked with hand soap and hand towels to encourage frequent use. Hot and cold water must be provided through a mixing valve so employees can properly wash their hands.
PEST CONTROL
7a Evidence of insects or rodents
PUBLIC HEALTH SIGNIFICANCE
Rodents such as mice and rats live in and feed on garbage and refuse. Disease-causing microorganisms are therefore often present on their hair, in their feces and urine. Microorganisms can be transmitted to people when rodents come into contact and contaminate food and food contact surfaces.
Flies breed in and feed on garbage, refuse and sewage. Disease-causing microorganisms are therefore often present on their body hairs and mouth parts. Microorganisms can be transmitted to people when flies land on and contaminate food and utensils.
TOXIC ITEMS
8a Improperly stored
PUBLIC HEALTH SIGNIFICANCE
Separation of cleaners, sanitizers and other chemicals from food, equipment and utensils helps ensure that chemical contamination does not occur. Cleaners, sanitizers and other chemicals must be stored below and away from all food, food preparation areas, warewashing areas, clean equipment and utensils, paper good and single service items.
FOOD LABELING AND PROTECTION
9b Food unprotected from contamination
PUBLIC HEALTH SIGNIFICANCE
Freezing prevents microbial growth in foods, but usually does not destroy all microorganisms. Improper thawing provides an opportunity for surviving bacteria to grow to harmful numbers. If the food is then refrozen, significant numbers of bacteria may be preserved in the food.
Disease-causing organisms can contaminate and/or grow in food that is not stored properly. Drips from condensation and drafts of unfiltered air can be sources of microbial contamination for stored foods. Shoes carry contamination onto the floors of food preparation and storage areas. Raw meats and poultry can contaminate cooked and ready to eat foods if stored above these ready to eat items. Even trace amounts of refuse or wastes present in toilet rooms, rooms used for dressing, storing garbage or tools, or rooms housing machinery can become sources of food contamination.
IMPROPER EQUIPMENT DESIGN AND CONSTRUCTION
10b Non-food contact surfaces
PUBLIC HEALTH SIGNIFICANCE
Non-food contact surfaces of equipment routinely exposed to splash or food debris must be constructed to be smooth, durable, nonabsorbent and easily cleanable. Equipment that does not meet these criteria becomes difficult to clean, allowing soil, moisture, debris and disease-causing bacteria to accumulate.
PHYSICAL FACILITIES
14b Garbage and refuse accumulation/uncovered
PUBLIC HEALTH SIGNIFICANCE
The proper storage and disposal of garbage and refuse is necessary to minimize insect, rodent and odor problems. Improperly handled garbage and refuse creates nuisance conditions, makes housekeeping difficult and can result in the contamination of food, equipment and utensils. Garbage and refuse is to be removed form the food establishment daily. It is to be stored in clean, covered, leak proof trash cans, dumpsters or compactors that prevent the scattering of the garbage and refuse by birds. Garbage and refuse must not attract, or harbor or act as a breeding place for flies and rodents. Recyclable materials must be handled in the same manner as garbage and refuse so as to minimize orders, insects and rodents. Recyclable materials, garbage and refuse must be removed from the premises at least once a week.
The proper storage of recyclable materials, garbage and refuse is necessary to minimize insect, rodent and odor problems. Trash dumpster, compactors must be located on concrete or rolled asphalt pads to provide a surface that can be easily cleaned, and that inhibits the breeding of flies and rodents. Floors, walls and ceilings of recycling rooms must be constructed of smooth, durable, non-absorbent materials to facilitate easy cleaning.
Toilet rooms and facilities must be of sanitary design and kept clean and in good repair to help prevent contamination of food preparation areas, to motivate employees to maintain a high degree of personal hygiene and to use good sanitary practices. Doors to toilet rooms must be kept closed to help prevent the possible spread of disease-causing microorganisms by flies.
PHYSICAL FACILITIES
14f Personal items stored incorrectly
PUBLIC HEALTH SIGNIFICANCE
Coats, handbags, shoes and other personal items that belong to employees can be a source of food, equipment and utensil contamination if not properly store. Personal items must be kept separate from food, preparation areas, warewashing areas and utensils. Lockers, coat hooks or an approved designated area is to be provided so workers can properly store their personal belongings.

FOOD TEMPERATURE CONTROL
3f Food thermometer not available
PUBLIC HEALTH SIGNIFICANCE
Most food poisonings are associated with foods held at temperatures between 41oF and 140oF for extended periods of time. Health Department inspections stress temperature control of potentially hazardous food.
Because food temperature control is so critical in assuring food safety all foods establishment must have and must use an accurate thermometer to check food temperatures. Food product thermometers are to be scaled 0—220oF. They must be accurate to +/-2oF. Food workers need to verify that foods are being properly cooled, that they are reheated to 165oF, that they are cooked to the required temperatures, that they are held hot above 140oF, etc. by using a thermometer.
SANITATION RINSE
4a Manual
PUBLIC HEALTH SIGNIFICANCE
All equipment, utensils and food contact surfaces must be properly washed and then sanitized to minimize food contamination. Washing is the removal of food residue or soil from surfaces. Sanitization is the application of heat or chemicals on cleaned surfaces that results in a 99.999% reduction of disease-causing microorganisms. There are many different types of sanitizers that can be used in food establishments. The most common include: hot water between 165oF and 180oF, chlorine mixed at a concentration of 50 ppm, quaternary ammonia mixed at a concentration of 200 ppm, and iodine mixed at a concentration of 12.5 ppm.
When equipment and utensils are washed and sanitized by hand a three basin sink is required. The first basin is filled with hot soapy water. The second is filled with clean rinse water and the third is filled with water containing sanitizer. Equipment and utensils are washed in the first basin to remove all food residue. They are then rinsed free of detergents in the second compartment and are then placed in the third compartment where they are sanitized. The equipment and utensils must remain in the sanitizing solution for at least one minute to allow the sanitizer enough contact time to effectively kill any disease-causing microorganisms that may be left on the surfaces after washing and rinsing.
TOXIC ITEMS
8a Improperly stored
PUBLIC HEALTH SIGNIFICANCE
Separation of cleaners, sanitizers and other chemicals from food, equipment and utensils helps ensure that chemical contamination does not occur. Cleaners, sanitizers and other chemicals must be stored below and away from all food, food preparation areas, warewashing areas, clean equipment and utensils, paper good and single service items.
FOOD LABELING AND PROTECTION
9a Not in original container; improperly labeled
PUBLIC HEALTH SIGNIFICANCE
The identity of a food's origin and composition is important when tracing its' source if implicated in a foodborne illness or if under recall. Ingredient information is needed by consumers who have allergies to certain foods or food ingredients. Bulk ingredients such as flour, sugar and salt that have been removed from their original containers must be labeled so they are not mistaken for similar looking ingredients and chemicals.
IMPROPER EQUIPMENT DESIGN AND CONSTRUCTION
10b Non-food contact surfaces
PUBLIC HEALTH SIGNIFICANCE
Non-food contact surfaces of equipment routinely exposed to splash or food debris must be constructed to be smooth, durable, nonabsorbent and easily cleanable. Equipment that does not meet these criteria becomes difficult to clean, allowing soil, moisture, debris and disease-causing bacteria to accumulate.
TESTING DEVICES
11c Chemical test kits not provided; inaccessible
PUBLIC HEALTH SIGNIFICANCE
The temperature of the wash and rinse water is a critical factor effecting cleaning and sanitizing of equipment and utensils. It is important that warewashing machines and high-temperature three-compartment warewashing sinks are therefore equipped with accurate thermometers to measure water temperatures. Sanitzer test kits must also be provided and used by food workers to ensure that the concentration of any chemical sanitizers being used are correct. Warewashing machines are required to operate at specific water flow pressures. Water flow pressure can greatly effect how well a dishmachine will sanitize. Low water flow pressure results in inadequate spray patterns and incomplete coverage of the equipment and utensils being washed. Excessive flow pressures will atomize water droplets and again result in incomplete coverage. A pressure gauge installed on the dishmachine’s final rinse line allows workers to monitor the water flow pressure of a dishmachine.
UTENSILS - SINGLE SERVICE ARTICLES
13a Utensils not provided; used/stored improperly
PUBLIC HEALTH SIGNIFICANCE
To help prevent contamination of food by workers, utensils must be provided and used to dispense food. Utensils must also be provided for use in all customer self service areas such as salad bars, buffets and for bulk food dispensing.
Utensils that are provided to dispense and serve foods must be stored and handled in a manner that protects the utensil and the food from contamination. Contaminated utensils will contaminate the foods that are being dispensed and served. To prevent possible contamination of food by utensils during pauses in preparation and dispensing , utensils must be stored:
a) in the food with the handle up out of the food,
b) in a running water dipper well,
c) in ice
water or in hot water that is above 140oF,
d) on a clean dry surface if the utensil is cleaned and sanitized once every four hours.
PHYSICAL FACILITIES
14a Plumbing not installed/maintained
PUBLIC HEALTH SIGNIFICANCE
It is critical that all plumbing fixtures, water and sewer lines in food establishments be maintained in proper working order. Poorly maintained plumbing systems may result in potential heath hazard such as cross connections, the back up of sewage, or leakage. These conditions may directly result in the contamination of food, equipment, utensils or paper goods. They can also adversely affect the ability of food handlers to adequately wash their hands, an establishment’s warewashing operations and increase the potential for cross contamination of food and equipment and utensil.
Toilet rooms and facilities must be of sanitary design and kept clean and in good repair to help prevent contamination of food preparation areas, to motivate employees to maintain a high degree of personal hygiene and to use good sanitary practices. Doors to toilet rooms must be kept closed to help prevent the possible spread of disease-causing microorganisms by flies.

Write your review!

Your Ratings

You can rate this restaurant in different categories from 1 star (worst) to 5 stars (best) or leave category unrated

Food:
Service:
Price:
Ambience:
Cleanliness:

Your Review

Please note that defamatory statements might be against the law. As soon as you visit any website, your IP address is available to that site.

Would you recommend PALETERIA CHIHUAHUA #2 to others? (optional)

Yes

  

No

Add photo of PALETERIA CHIHUAHUA #2 (optional)

Add more info about the restaurant »

Takes reservations:

Yes No

Accepts credit cards:

Yes No

Parking:

Garage Private Lot Street Valet Validated

Attire:

Casual Dress Business Casual Jacket Preferred Jacket Required Jacket and Tie Required Formal Attire

Good for groups:

Yes No

Good for kids:

Yes No

Delivery:

Yes No

Take-out:

Yes No

Waiter service:

Yes No

Outdoor seating:

Yes No

Wi-Fi:

Yes No

Good for:

Breakfast Brunch Lunch Dessert Dinner Late Night

Alcohol:

Beer & Wine Only Full Bar Happy Hour

Noise level:

Quiet Average Loud

Ambience:

Casual Classy Dive-y Hipster Intimate Romantic Touristy Trendy Upscale

Has TV:

Yes No

Caters:

Yes No

Wheelchair accessible:

Yes No

Live music:

Yes No

Scenic view:

Yes No

Gluten-free friendly:

Yes No

Vegan friendly:

Yes No

Cuisines:

Afghan African American Argentinian Asian Austrian Bagels Bakery Barbecue Bolivian Brazilian Breakfast & Brunch Buffet Burgers Cajun & Creole California Caribbean Chicken Chilean Chinese Coffee Colombian Cuban Delicatessen Desserts & Ice Cream Dim Sum Diner Dominican Donuts Eastern European Ecuadorian El Salvadoran English & Irish Ethiopian & Eritrean European Fast Food Filipino Floribbean French Frozen Yogurt Gastropub German Greek Guatemalan Hawaiian Honduran Hot Dogs & Sausages Indian Indonesian International Italian Jamaican Japanese Korean Kosher Latin American Mediterranean Mexican Middle Eastern Modern American Moroccan Nicaraguan Noodle Shop Nuevo Latino Organic Pakistani Peruvian Pizza Portuguese Pub Food Puerto Rican Russian Salad Sandwiches & Subs Seafood Smoothies Soup Southern & Soul Southwestern Spanish Steakhouse Sushi Tacos Tapas Tea Teriyaki Tex-Mex Thai Turkish Uruguayan Vegetarian Venezuelan Vietnamese Wine Bar

About You

Your nickname:
I have read, and agree to the Terms of Service

Optional Verification

(additional info to increase the weight and the placement of your review and ratings)

	Log in»  |   Register - it's free and very quick!
Real Name:
Email (won't be published):
Date and time of your visit to this restaurant:
Phone number (won't be published):
	Show my IP address (3.15.188.xxx) to everybody
	Leave your signature» Clear Make my signature public

Send Review!

Recently added reviews

Name	City	Users' Rating
LITTLE MISS LATTE #3	Denver, CO
Pho Saigon 66	Denver, CO
Piper Inn	Denver, CO
Karelys Bar	Denver, CO
Roberto Gomez Pizza and Burritos	Denver, CO
Gomez Burritos	Denver, CO
ANTHONY'S PIZZA & PASTA	Denver, CO
7 - ELEVEN	Denver, CO
A MART STORE	Denver, CO
BOSTON MARKET	Denver, CO

1. Colorado small cities
2. Colorado smaller cities
3. Colorado
4. Denver County, CO Restaurants