- Drain cover(s) missing.
- Critical - No handwashing sign provided at a handsink used by food employees.
- Critical - Observed an open beverage container on a food preparation table or over/next to clean equipment/utensils. Corrected On Site.
- Observed hole in wall.
- Wet mop not hung to dry.
|
3/27/2012 | Routine - Food | Inspection Completed - No Further Action |
- Critical - No conspicuously located thermometer in holding unit.
- Critical - No handwashing sign provided at a handsink used by food employees.
- Critical - Observed food employee wearing jewelry other than a plain ring on their hands/arms while preparing food. Watch.
- Observed ice scoop with handle in contact with ice.
- Critical - Observed soil buildup inside ice bin.
- Observed unnecessary items on the premise.
- Critical - Vacuum breaker mising at hose bibb. Mop sink.
- Critical - Vacuum breaker mising at hose bibb. Rear of building.
- Wet mop not hung to dry.
- Wet wiping cloth not stored in sanitizing solution between uses.
|
11/29/2011 | Routine - Food | Inspection Completed - No Further Action |
- Carbon dioxide/helium tanks not adequately secured.
- Critical - Observed buildup of slime in the interior of ice machine.
- Observed food debris accumulated on dry storage floor.
- Observed single-service items stored on floor.
- Critical - Vacuum breaker mising at hose bibb.
- Critical - Vacuum breaker mising at hose bibb. Mop sink.
|
10/25/2011 | Routine - Food | Inspection Completed - No Further Action |
- (C) SINGLE-SERVICE and SINGLE-USE ARTICLES shall be stored as specified under Paragraph (A) of this section and shall be kept in the original protective PACKAGE or stored by using other means that afford protection from contamination until used. (D) Items that are kept in closed packages may be stored less than 6 inches above the floor on dollies, pallets, racks, and skids that are designed as provided under Section 4-204.122.
- Critical - (E) Except when dry cleaning methods are used as specified under Section 4-603.11, surfaces of UTENSILS and EQUIPMENT contacting FOOD that is not POTENTIALLY HAZARDOUS shall be cleaned: (1) At any time when contamination may have occurred; (2) At least every 24 hours for iced tea dispensers and CONSUMER self-service UTENSILS such as tongs, scoops, or ladles; (3) Before restocking CONSUMER self-service EQUIPMENT and UTENSILS such as condiment dispensers and display containers; (4) In EQUIPMENT such as ice bins and BEVERAGE dispensing nozzles and enclosed components of EQUIPMENT such as ice makers, cooking oil storage tanks and distribution lines, BEVERAGE and syrup dispensing lines or tubes, coffee bean grinders, and water vending EQUIPMENT: (a) At a frequency specified by the manufacturer, or (b) Absent manufacturer specifications, at a frequency necessary to preclude accumulation of soil or mold.
- Critical - Backflow Prevention Device, When Required. A PLUMBING SYSTEM shall be installed to preclude backflow of a solid, liquid, or gas contaminant into the water supply system at each point of use at the FOOD ESTABLISHMENT, including on a hose bibb if a hose is attached or on a hose bibb if a hose is not attached and backflow prevention is required by LAW, by: (A) Providing an air gap as specified under Section 5-202.13; or (B) Installing an APPROVED backflow prevention device as specified under Section 5-202.14.
|
3/28/2011 | Routine - Food | Inspection Completed - No Further Action |
- Critical. (A) In a mechanically refrigerated or hot food storage unit, the sensor of a temperature measuring device shall be located to measure the air temperature or a simulated product temperature in the warmest part of a mechanically refrigerated unit and in the coolest part of a hot food storage unit. (B) Except as specified in Paragraph (C) of this section, cold or hot holding equipment used for potentially hazardous food shall be designed to include and shall be equipped with at least one integral or permanently affixed temperature measuring device that is located to allow easy viewing of the device's temperature display. (C) Paragraph (B) of this section does not apply to equipment for which the placement of a temperature measuring device is not a practical means for measuring the ambient air surrounding the food because of the design, type, and use of the equipment, such as calrod units, heat lamps, cold plates, bainmaries, steam tables, insulated food transport containers, and salad bars. (D) Temperature measuring devices shall be designed to be easily readable. (E) Food temperature measuring device and water temperature measuring device on warewashing machines shall have a numerical scale, printed record, or digital readout in increments no greater than 2 degrees Fahrenheit in the intended range of use.
- During pauses in food preparation or dispensing, food preparation and dispensing utensils shall be stored: (A) Except as specified under Paragraph (B) of this section, in the food with their handles above the top of the food and the container; (B) In food that is not potentially hazardous with their handles above the top of the food within containers or equipment that can be closed, such as bins of sugar, flour, or cinnamon;
- Critical. Equipment food-contact surfaces and utensils shall be clean to sight and touch.
- (C) NonFOOD-CONTACT SURFACES of EQUIPMENT shall be kept free of an accumulation of dust, dirt, FOOD residue, and other debris.
- (A) Except as specified in Paragraph (B) of this section, SINGLE-SERVICE and SINGLE-USE ARTICLES may not be stored: (1) In locker rooms; (2) In toilet rooms; (3) In garbage rooms; (4) In mechanical rooms; (5) Under sewer lines that are not shielded to intercept potential drips; (6) Under leaking water lines including leaking automatic fire sprinkler heads or under lines on which water has condensed; (7) Under open stairwells; or (8) Under other sources of contamination. (B) SINGLE-SERVICE and SINGLE-USE ARTICLES that are PACKAGED or in a facility such as a cabinet may be stored in a locker room.
- Critical. (A) A handwashing lavatory shall be maintained so that it is accessible at all times for EMPLOYEE use.
- (6) All building structural components, attachments and fixtures shall be kept in good repair, clean and free of obstructions.
- Drying Mops. After use, mops shall be placed in a position that allows them to air-dry without soiling walls, EQUIPMENT, or supplies.
- Maintaining PREMISES, Unnecessary Items and Litter. The PREMISES shall be free of: (A) Items that are unnecessary to the operation or maintenance of the establishment such as EQUIPMENT that is nonfunctional or no longer used; and (B) Litter.
- (d) Carbon dioxide and helium tanks shall be adequately secured so as to preclude any danger to safety.
|
11/30/2010 | Routine - Food | Inspection Completed - No Further Action |
- Critical. Observed soiled walk-in cooler gaskets.
- Observed single-service items stored on floor. Corrected On Site.
- Observed single-service items stored on floor. Corrected On Site.
- Critical. Observed handwash sink used for purposes other than handwashing. Food in handwash tub. Corrected On Site.
- Critical. Handwashing cleanser lacking at handwashing lavatory.
- Critical. Observed toxic item stored by utensils. Corrected On Site.
- Critical. Manager lacking proof of Food Manager Certification.
- Critical. No proof of required employee training provided. All public food service establishments must provide the division with proof of employee training upon request, including, but not limited to, at the time of any division inspection of the establishment. Pro
|
5/26/2010 | Routine - Food | Warning Issued |
Restaurant representatives - add corrected or new information about Mr Wings, 4027 N Davis Hwy, Pensacola, FL »